Gateway Solo 9300 - Protecting from power source problems

8 About Your Notebook
Component Icon Description
A Elevating feet Extend these feet to tilt the
notebook forward and to provide
a more natural typing position.
B Memory bay Install up to two SO-DIMM
memory modules in the slots
held within this bay.
C Main battery bay Insert the main battery into this
bay.
D Battery release latch Slide to release the battery.
E Modular bay Insert either a diskette drive,
LS-120 SuperDisk drive, second
hard drive, or second battery into
this bay.
F Modular bay release latch Slide to release the module.
G System identification label Find the product model number
and serial number on this label.
For more information on the
label, see “Identifying your
model” in the Maintaining and
Troubleshooting guide.
H CD/DVD drive bay Insert either a DVD, CD, CD-R, or
CD-RW drive into this bay.
I Release latch for CD/DVD
disc drive bay
Slide to release the drive.