Gateway Solo 9300 - Setting up an Internet account; Accessing your Internet account

Using composite video 77
Using MGI VideoWave III
MGI VideoWave III is a video capture program that lets you display and
capture video (single frame or video stream) from the optional Composite
Video In connection. The VideoWave III’s TV Tuner mode is not supported.
To use VideoWave III:
1 Connect the Video Out connection of your external source, such as a
video camera, to the optional Composite Video In connection on your
notebook. For information on the location of this connector, see “Back”
on page 5.
2 Connect the Audio Out connection of your external source (if available)
to the Line In connection on your notebook. You will need to change
the audio source to Line In. See “Changing the audio source” on page 78.
3 Click
Start, then select Programs, MGI VideoWave III, then MGI VideoWave III.
VideoWave III starts. For more information on using VideoWave III, see
its online Help.