Using composite video or S-Video 139
Using composite video or S-Video
The Composite Video Out connection lets you view your notebook display
on a TV screen using a standard RCA video cable. The S-Video Out connection
lets you view your notebook display on a TV screen using a standard S-Video
cable.
The Composite Video In connection (functionality depends on your
notebook) lets you view video or still images from a VCR or video camera
using a standard RCA video cable. The MGI VideoWave III video capture
program lets you capture video or still images and store them on your hard
drive. For information on using MGI VideoWave III, see “Using composite
video” on page 76.
To connect your notebook to a TV:
1 Connect one end of a standard RCA video cable to the Composite Video
Out connection on the port replicator, or connect one end of a standard
S-Video cable to the S-Video Out connection on the port replicator.
2 Connect the other end of the cable to the Video In connector on your
television or VCR.
3 Switch the display to Composite Video Out or S-Video Out by pressing
F
N+F3.
4 Reset your display screen area setting to 640
× 480 with large text fonts
for best viewing.
Important To enable external video by default, connect the TV (or
other external viewing device) before starting your
notebook.
Important DVD playback to a VCR will be scrambled by copyright
protection technology.
To Next Page
Loading...
