1-28 Getting Started
GBC Short Edge Punch Queue Output
Figure 1-20: The Print Queue Output Window
Refer to Figure 1-20 above and fill in or choose the fields, as specified
in the table below, for a GBC Short Edge Punch Queue Output.
Item Entry
a System Specified
b System Specified
c Check the Override option
d System Specified
e Check the Override option
f GBCSE (Note if the GBCSE Personality Profile is not
Online and Enabled, this option will not show up in the
drop down list)
g Check the Override option
h Click OK, then OK again in new Queue Setup window
a
d
e
f
g
b
c
h
To Next Page
Loading...
Need help?
General
