Creating 61XX Profiles and Print Queues 1-29
1
SBM1/SBM2 Queue Output
Figure 1-21: The Print Queue Output Window (SBM Setup)
Refer to Figure 1-21 above and fill in or choose the fields, as specified
in the table below, for a SBM Punch Queue output.
Item Entry
a 2-Sided (Do not check the override option)
b System Specified
c Check the Override option
d System Specified
e Check the Override option
f Same as the name of the Finisher Profile for the
SBM1/SBM2
g Check the Override option
h Click OK, then OK again in new Queue Setup window
a
d
e
f
g
b
c
h
To Next Page
Loading...
Need help?
General
