4-4 Maintenance
What to Use
GBC recommends using only 90% Isopropyl alcohol and a clean, lint-free
cloth. 90% Isopropyl alcohol is available from any local pharmacy.
CAUTION: To prevent possible damage to the machine, use only 90%
Isopropyl alcohol. Do not use film remover or any other type of cleaning
solvent.
What to Clean
A good rule for cleaning that is easy to remember is to follow the paper path
through the Punch and Bypass Stacker, from left to right. The cleaning
procedures are as follows:
WARNING: Switch OFF (O) the Main Power Switch before performing this
procedure.
To Next Page
Loading...
Need help?
General
