GE 29582 - Troubleshooting Remote Commands; Troubleshooting Message Playback; Resolving Error Messages

• Memoryisfull.
Won'trespondto remotecommands
• Youmustuse atouch-tone phone.
• Youmustenter the correct securitycode.
• Didunithang up?Ifyoutake no actionfor a periodof time,it automatically hangs
up.
Answererdoesn'twork
• Unplugthe powercordfrom theelectricaloutletand plugit back into resetthe
answerer.
Afterthe unitis pluggedin,the screendisplaysFLASHERROR.
• Unplugthe unitand plug it backin. Ifthe messageappears again,the unit needs
service.
Can'thearmessages
• Adjustthe volumecontrol.
Greetingcontinuesto playeven after an extensionphoneis pickedup.
• Thisisnormaloperation.Autodisconnectisdelayedfor 1secondafter the unit
answersa call.Ifyou arenearthe unit, pressPLAY/STOPto stopthe greeting.
Noinformation isshownafter the phonerings
• Besureto wait untilthe secondring beforeanswering.
• Checkall cablingto makesurethat all connectionsaresecureand not damaged.
• Didyouorder CallerIDservicefrom your localtelephonecompany?
Errormessageis displayed
• ThescreendisplaysERRORifthe unitdetectsanything otherthan valid CallerID
informationduring the silent periodafter the first ring.Thismessageindicates
eitherthe presenceof noiseonthe line,or that an invalid messagehas beensent
from thetelephonecompany?
33