GE 469

2-2 469 Motor Management Relay GE Power Management
2.1 MECHANICAL 2 INSTALLATION
2
2.1.2 PRODUCT IDENTIFICATION
Each 469 unit and case are equipped with a permanent label. This label is installed on the left side (when fac-
ing the front of the relay) of both unit and case. The case label details which units can be installed.
Figure 2–3: CASE AND UNIT IDENTIFICATION LABELS
The case label details the following information:
• MODEL NUMBER
• MANUFACTURE DATE
• SPECIAL NOTES
The unit label details the following information:
• MODEL NUMBER
•TYPE
• SERIAL NUMBER
• MANUFACTURE DATE
• PHASE CURRENT INPUTS
• SPECIAL NOTES
• OVERVOLTAGE CATEGORY
• INSULATION VOLTAGE
• POLLUTION DEGREE
• CONTROL POWER
• OUTPUT CONTACT RATING