ATS Control Panel
Manager's manual
16
0-All 1, Office 2, Boardroom 3, Workshop
Enter Area:
5. You have four options:
Option Action Result
Arm all areas Press 0 and [ENTER]
Arms all areas at once. Returns you to the original
display.
Arm individual areas Enter area number and press [ENTER].
When finished arming, press [ENTER] again.
Arms the selected area. If there are more
disarmed areas, they will be displayed.
Cancel Press [CLEAR]
Exit and return to the original display. Areas
already armed, stay armed.
Display more areas Press [NEXT]
Displays the next disarmed area in the list. You
can then select an area to be armed, or continue
to press [NEXT].
6. The area LEDs illuminate when the arming procedure has been successful.
To Next Page
Loading...
