ATS Control Panel
Manager's manual
18
Option Action Result
Disarm all areas Press 0 and [ENTER]
Disarms all areas at once. Returns you to
the original display.
Disarm individual areas Enter area number and press [ENTER].
When finished disarming, press [ENTER] again.
Disarms the selected area. If there are
more armed areas, they will be displayed.
Exit Press [CLEAR]
and [ENTER]
Exit and return to the original display.
Areas already disarmed, stay disarmed.
Display more areas Press [NEXT]
Displays the next armed area in the list.
You can then select an area to be armed,
or continue to press [NEXT].
5. The area LEDs extinguish when the disarming procedure has been successful.
See also: Service Menu - Menu Option 7, page 35
To Next Page
Loading...
