ATS Control Panel
Manager's manual
34
Option Action
Display complete zone name Enter the zone number and press [ENTER]
Update the list of zones and display the remaining
zone (if any)
Press [NEXT]
If zone test report is displayed, display the camera
test results (if applicable)
Press [ENTER]
Exit Press [ENTER]
• Arm test:
All zones tested successfully Untested zones
No Untested Zones
Press ENTER
Untested zones are listed either one at a time, or as a list of numbers:
Untested Arm On 17, Rear Door Contact
NEXT or ENTER
or
Untested Arm On 9, 14, 17.
Zone No:
5. From the display you can now:
Option Action
Display the complete zone name Enter the zone number and press [ENTER]
Update the list of zones and display the remaining zones (if any) Press [NEXT]
Exit Press [ENTER]
To Next Page
Loading...
