9
Comms Fail
When there is a failure in the communications between THE Advisor MASTER control panel and a central
station.
RAS Fail When a remote arming station is offline.
DGP Fail When a data gathering panel is offline.
Battery Fail When the auxiliary battery power is found to be low.
Trouble Indicates a trouble in the system (RAS fail, low battery, etc).
Screen saver
In some cases it is required to activate a screen saver in the system. This screen saver will prohibit any status
from being shown on the display or the LEDs some time after an action has been done.
Area LEDs will not be lit, keypad text will only shows as if nothing has happened, no alarm or fault indication
will be visible. The screen saver being active is shown in the bottom of the LCD where the text Code: will be
shown as Code#.
To Next Page
Loading...
Need help?
General
