What to do if GE Amersham Typhoon displays 'Please set PMT voltage in the range 250 to 1000'?
If the GE All in One Printer displays 'Please set PMT voltage in the range 250 to 1000', it means the PMT voltage setting is outside the permitted range. You should type a PMT voltage value between 250 and 1000 in the PMT field.
What to do if GE Amersham Typhoon All in One Printer displays 'The stage is not properly inserted'?
If the GE All in One Printer displays 'The stage is not properly inserted', it means that the stage is not correctly positioned. You should insert the stage properly.
Critical operation, intended use, and prerequisites for safe use.
Covers radiation hazard prevention, controlled areas, and pollution limits.
Details safety measures for general, personal, power, installation, operation, and maintenance.
Guides through emergency shutdown and power failure response.
Explains the software's main window interface, controls, and panes.
Provides step-by-step instructions for physical scanner setup and placement.
Covers starting the system and procedures for changing filters.
Explains sample preparation for fluorescence, phosphor imaging, and densitometry.
Guides through pre-scan, scanning, stopping, and saving image data.
Addresses common error messages and general troubleshooting steps.
Lists specific error messages encountered during operation and their corrective actions.
General| Brand | GE |
|---|---|
| Model | Amersham Typhoon |
| Category | All in One Printer |
| Language | English |
To Next Page