GE CT-9800 - Page 137

GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 17 Direction 18000
4-10-14A/4-10-14B (blank)
UP, UPAP, and M to R Timing Changes
WF Change: The time it takes to run UP, UPAP and to drop from M-level to
R-level , all have increased for WF software release. Refer to
Table 1 for a list of timing increases for WF.
Reason for Timing Increases: UP will take about 30 seconds longer in WF because of
changes in UPAP and the addition of ONLINE configuration
tool.
When APSNPON has been invoked, then it will take an
additional 80 to 90 seconds to drop from “M” to “R” level.
Change to Existing (Pre-WF) Manuals: New for WF.
Function Performed WF Timing Increases
Running UP 30 sec.
Running UPAP 20 sec.
Drop from M-level to R-level
with APSNPON
80 to 90 sec.
TABLE 1
Timing Increases for WF