GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 19 Direction 18000
NOTES TO TABLE 4-1-1
1 Gantry complete assembly serialized and H.H.S. certified after August, 1985 CODES FOR TYPE OF X-RAY CERTIFIED COMPONENT
2 CT system model and serial number for systems manufactured after August 1985 and reported A Beam Limiting Device
in item 4e under ‘Beam Limiting Device’ on FDA form 2579 (8/82). B Tube Housing Assembly
3 Separate nameplate with assembly date and H.H.S. certification, no model or serial number. F X-Ray Control
4 Main Table assembly is HHS certified after August, 1985, and nameplate relocated below side H High Voltage Control
covers J Table
5 Reported as “Master Control” with model and serial number in item 4b, 4c, and 4d of FDA K Cradle
form 2579 (8/82) for all CT systems. N Other
6 QA and Performance Phantom replaces Resolution and Linearity after August, 1985.
TABLE 4-1-1 SHEET1
COMPONENT NAMEPLATES WITH MODEL #, SERIAL #, AND H.H.S CERTIFICATION FOR CT9800 SYSTEMS
To Next Page
Loading...
