GE CT-9800

GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 12 Direction 18000
4-1-4
TABLE 4-1-1 Sheet 2
COMPONENT NAMAEPLATES WITH MODEL #, SERIAL #, AND H.H.S. CERTIFICATION FOR CT 9800 SYSTEMS
NOTES TO TABLE 4-1-1
1 Gantry complete assembly serialized and H.H.S. certified after August, 1985
2 CT system model and serial number for systems manufactured after August 1985 and reported in
item 4e under ‘Beam Limiting Device’ on FDA form 2579 (8/82).
3 Separate nameplate with assembly date and H.H.S. certification, no model or serial number.
4 Main Table assembly is HHS certified after August, 1985, and nameplate relocated below side covers.
5 Reported as “Master Control” with model and serial number in item 4b, 4c, and 4d of FDA form 2579
(8/82) for all CT systems.
6 QA and Performance Phantom replaces Resolution and Linearity after August, 1985.
CODES FOR TYPE OF X-RAY CERTIFIED COMPONENT
A Beam Limiting Device
B Tube Housing Assembly
F X-Ray Control
H High Voltage Control
J Table
K Cradle
N Other
TABLE 4-1-1 Sheet 2
COMPONENT NAMAEPLATES WITH MODEL #, SERIAL #, AND H.H.S. CERTIFICATION FOR CT 9800 SYSTEMS