GE CT-9800

GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 3 Direction 18033
8-2-4
2. Service Release Notice
This release notice is called from DIR CTDS at R level by entering TYPE SCDG.RN return. The following
example print out will appear on the A/N CRT (if a line printer is available, enter PRINT 9800S.RN return).
NOTE: The CTDS/G tape must be loaded prior to looking at this file.
R
DIR CTDS
R
TYPE SCDG.RN
FCO II GENERAL DIAGNOSTICS (SCDG) RELEASE NOTICE
------------------------------------------------
THE FOLLOWING GENERAL DIAGNOSTICS HAVE BEEN CHANGED/ADDED FOR
THE FCO II RELEASE (SCDG):
1) EM FILES -
° EM FILES NOW EXIST INDIVIDUALLY FOR THE FOLLOWING
DIAGNOSTIC PROGRAMS: NEW TUBE (NT), GAIDS (GS),
GRAPHICAL ANALYSIS (GA), CHARACTERIZATION (CH) AND
DATA COLLECTION (DC). THESE FILES MAY BE LOOKED
AT BY TYPING “TYPE <DIAGNOSTIC_NAME>, EM”. FOR
EXAMPLE, TO LOOK AT THE EM FILE FOR NEW TUBE TYPE
“TYPE NT.EM”. NOTE THAT CONTROL-S AND CONTROL-Q
MAY BE USED ALTERNATELY TO START AND STOP THE A/N
DISPLAY IF THE KEYS ARE ENABLED.
2) NEW TUBE (NT) -
° THE NEW TUBE COOLING ALGORITHM, WHICH SUPPORTS
GRAPHITE TUBES HAS BEEN INCORPORATED INTO NEW
TUBE. THIS MEANS THAT BOTH METAL AND GRAPHITE
TUBES ARE SUPPORTED. IF THE HARDWARE TUBE
INDICATOR IS DIFFERENT FROM THE SOFTWARE DATABASE
TUBE TYPE THE OPERATOR WILL BE INFORMED OF THE
MISMATCH AND GIVEN THE OPTION TO TERMINATE THE
PROCESS OR RUN WITH METAL TUBE COOLING ALGORITHM
AND THE HARDWARE TUBE TYPE SEASONING ALGORITHM.
° EM FILE SUPPORT (SEE 1).
3. DATA COLLECTION (DC) -
° THE NEW TUBE COOLING ALGORITHM, WHICH SUPPORTS
GRAPHITE TUBE HAS BEEN INCORPORATED INTO DATA.
etc.