GE CT-9800 - Page 452

GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 3 Direction 18000
8-6-14
*** NO IOC BOARD ***
*** Deadstart Program (DS) *** Revision 1.05
Configuration Information
Processor Type = ST-X
01 Compute Head(s)
02 Back Projector Board(s)
ACU Rounding Mode = ST-100
SMP MUX NOT PRESENT
Main Memory 1.0 Mega words
*** RESET Complete ***
*** Deadstarts Complete *** Unable to establish communications with AP.*E*
*** NO SLAVE BOARD ***
*** Deadstart Program (DS) *** Revision 1.05
Configuration Information
Processor Type = ST-X
01 Compute Head(s)
02 Back Projector Board(s)
ACU Rounding Mode = ST-100
SMP MUX NOT PRESENT
Main Memory 1.0 Mega words
*** RESET Complete ***
PASSED Master ROM test
PASSED Master private RAM test
PASSED Master public memory test
PASSED Master TIMER test
*** FAILED Slave CP test
*** FAILED Slave ROM test
*E* *** FAILED Slave private RAM test, failing address = 0000
*E* *** FAILED Slave public memory test, failing address = 0000
*** RESET Complete ***
Deadstart Part 2 Download in Progress
........
PASSED IOP0 test
*** FAILED PLS Head 0 test
*** FAILED Backprojector Controller test
failing Back Projectors
00 01 02 03 04 05
Main memory = 1.0 Mega words found
IOP’s are = DAS CHI - - -
*** Deadstarts Complete ***