GE CT-9800

GE MEDICAL SYSTEMS CT 9800 QUICK SYSTEM
Rev. 9 Direction 18000
4-3-17
3-5 Initial ZEBRA Disk Drive Check (Continued)
The status might then look like:
L
RUN START TIME WAS 8/6/82 13:44
DRIVE 0
SECTORS READ 369410
SECTORS WRITTEN 743280
BAD SECTOR
CYL HEAD SECTOR
646 5 16
DATA ERRORS
CYL HEAD SECT COUNT
646 5 16 1
ADDRESS ERROR
CYL HEAD SECT COUNT
0 BAD SECTORS ON CYLINDER 0
1 BAD SECTORS MAX ON CYLINDER 646
1 BAD SECTORS MAX ON SURFACE 5
1 BAD SECTORS TOTAL
0 HARD DATA ERRORS > 11 BITS
f. When the requested number of passes is complete, the status will be posted as if you typed L, and it will
be followed by:
HALT WAS ENCOUNTERED @ 1101
TO RESTART GIVE ADDRESS & ”R”
0
@
To exit the program, hold the UNLOCK switch on the computer and press RESET.