GE D25 - Page 125

GE Grid Solutions
D25
User's Manual
GE Information 994-0081-3.00-21
125
Shelf Plate, Continued
Procedure:
Replacing the
Shelf Plate
How to replace the Shelf Plate:
Step Action
1 Before inserting the Shelf Plate into the enclosure, lift the front
end of the locking bracket levers until they click into the up
position.
2 Align the Shelf Plate with the top card guides, and carefully slide
the Shelf Plate and attached cards into the housing.
3 Firmly push the Plate into the housing until it is fully engaged into
its grounding clips at the rear of the enclosure.
Note: The Locking Brackets should fall back into a “locked”
position. Check this by pulling on the Plate to see if it is
secure.