GE D25 - Page 45

GE Grid Solutions
D25
User's Manual
GE Information 994-0081-3.00-21
45
Control Outputs, Continued
Table: D25KE
DB-25 Control
Function
Terminal
Block – P1
Phoenix 8-pin terminal block – P1 Pinout:
P1
Pin
Signal Function Comments
1 COIL_SUP Control Voltage Interposer Relay Coil Power Supply
connections
2 COIL_SUP_R
TN
Control Voltage return
3 JMP1 Relays 1-8 mode
jumper point
Jumper to Pin 1-5 (+VC) for R/L
Jumper to Pin 1-6 (MT) for T/C
4 JMP2 Relays 9-16 mode
jumper point
Jumper to Pin 1-5 (+VC) for R/L
Jumper to Pin 1-6 (MT) for T/C
5 +VC Control Voltage (fused) Jumper to JMP1 through 4 for R/L
6 MT Master Trip Bus Jumper to JMP1 through 4 for T/C
7 JMP3 Relays 17-24 mode
jumper point
Jumper to Pin 1-5 (+VC) for R/L
Jumper to Pin 1-6 (MT) for T/C
8 JMP4 Relays 25-32 mode
jumper point
Jumper to Pin 1-5 (+VC) for R/L
Jumper to Pin 1-6 (MT) for T/C
1 2 3 4 5 6 7 8