GE D25 - Page 46

D25
User's Manual
GE Grid Solutions
46
994-0081-3.00-21 GE Information
Control Outputs, Continued
D25KE DB-25
Control Voltage
Connections
Control voltage can be supplied by either an external power supply, or the
D25’s own power supply. In either case, connect the control voltage to P1
pins 1 and 2.
To provide control voltage using the D25 internal supply, connect as shown:
POWER
A
D25 M
UT
C
E
DC ANALOG
INPUTS
GND
SYS
FAIL AUX KEY
6 5 4 3 2 1
RADIO
J1 J2 J3
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
1 2 3 4 5 6 7 8
2 Jumpers Required
to provide Control
Voltage from D25
Power Supply
Connect from D25
Power Supply:
-Term 1 to P1-1
-Term 2 to P1-2
P1
1 3 5
2 4
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
H
Note: The (external) control voltage can be up to 75 Vdc or 50 Vac.