K0430 Issue No. 3 viii
Date and Time (Real Time Clock) 40
Date Format 40
Set Date 40
Set Time 40
Calibration
General 41
Calibration Check 41
Calibration Adjustment 41
Guide to Calibration Procedures 41
Test Equipment 42
Using the Calibration Menu 43
Change PIN 43
Calibrate Internal Ranges 43
Internal Pressure Range 44
Voltage Input Range (5 Volts) 45
Voltage Input Range (30 Volts) 47
Current Input Range (55 mA) 49
Current Output Range (24 mA) 51
Ambient Temperature Channel 54
Calibrate External Sensors 55
Add External Sensor 56
Hydraulic Calibrator Versions
Introduction 59
Safety Instructions 60
Preparation for Use 60
Bleeding the System 61
Operation 62
Draining the Hydraulic Fluid 62
Flushing, Replenishing or Changing the Hydraulic Fluid 63
Appendix 1 - Datalog File Example
Typical Uploaded Datalog File (DPI 610) 67
Typical Uploaded Procedure Data File (DPI 615) 68
Appendix 2 - ATEX Certificate of Conformity
To Next Page
Loading...
