K0430 Issue No. 4 36
General
SETUP mode is available in all modes except BASIC and permits the changing of the
following instrument parameters.
• Store Mode - None, Snapshot, Data Log.
•Contrast.
• Settings - Units, Language, RS232 parameters, Powerdown and Calibration Routines
(Refer to page 41 for calibration details).
• Date and Time (Real Time Clock).
Store Mode
Select STORE MODE from the Set-up menu and select required mode as follows:
Contrast
Select CONTRAST from the Set-up menu and proceed as follows:
Using Setup
To Next Page
Loading...
