Installation
12
User Manual V1.3-2022-11-18
5 Installation
5.1 Installation Requirements
1. 'RQRWLQVWDOOWKHHTXLSPHQWLQDSODFHQHDUࢊDPPDEOHH[SORVLYHRUFRUURVLYHPDWHULDOV
2. Install the equipment on a surface that is solid enough to bear the inverter weight.
3. ,QVWDOOWKHHTXLSPHQWLQDZHOOYHQWLODWHGSODFHWRHQVXUHJRRGGLVVLSDWLRQ$OVRWKH
installation space should be large enough for operations.
4. The equipment with a high ingress protection rating can be installed indoors or outdoors.
The temperature and humidity at the installation site should be within the appropriate range.
5. Install the equipment in a sheltered place to avoid direct sunlight, rain, and snow. Build a
sunshade if it is needed.
6. Do not install the equipment in a place that is easy to touch, especially within children’s
reach. High temperature exists when the equipment is working. Do not touch the surface to
avoid burning.
7. Install the equipment at a height that is convenient for operation and maintenance, electrical
connections, and checking indicators and labels.
8. ,QVWDOOWKHLQYHUWHUDZD\IURPKLJKPDJQHWLFࢉHOGWRDYRLGHOHFWURPDJQHWLFLQWHUIHUHQFH,I
WKHUHLVDQ\UDGLRRUZLUHOHVVFRPPXQLFDWLRQHTXLSPHQWEHORZ0+]QHDUWKHLQYHUWHU\RX
have to:
• Install the inverter at least 30m far away from the wireless equipment.
• $GGDORZSDVV(0,ࢉOWHURUDPXOWLZLQGLQJIHUULWHFRUHWRWKH'&LQSXWFDEOHRU$&RXWSXW
cable of the inverter.
Installation Environment Requirements
≥300mm
≥300mm
≥500mm
≥200mm
≥200mm
Children No Touch