GE GFE26JSM User Manual

– 12 –
The product should not be installed in the
following locations:
• Where the temperature will go below 60°F
(16°C) because it will not run often enough to
maintain proper temperatures.
• Where the temperature will go above 100°F
(37°C) because it will not perform properly.
• In a location exposed to water (rain, etc.) or
direct sunlight.
• The refrigerator should be installed on a oor
strong enough to support it fully loaded.
NOTE: Not recommended for installation on
carpeted ooring.
Installation
These refrigerators should have the following
clearances for ease of installation, proper air
circulation, and enough room for plumbing and
electrical connections.
• Sides: 1/8 inch
• Top (Cabinet/Hinge Cover): 1 inch
• Back: 2 inches
• 115 volt 60Hz, 15 or 20-amp power supply is
required.
• An individual properly grounded branch circuit
or circuit breaker is recommended.
NOTE: A GFI (Ground Fault Interrupter) is not
recommended.
• It is required that the refrigerator be plugged
into a grounded 3-prong outlet.
• Ground prong should not be removed.
• Use of a 2-prong adapter or an extension
cord is prohibited.
• Frayed or damaged power cord should
immediately be replaced.
WARNING
Electrical Shock Hazard
The refrigerators have adjustable legs at the front
corners. The leveling legs should be set so the
refrigerator is rmly positioned on the oor and
the front is raised enough that the doors close
easily when opened about halfway.
To Adjust the Leveling Legs:
• Turn the legs clockwise to raise or
counterclockwise to lower the refrigerator.
Refrigerator Location
Additional Specications
Clearances
Leveling

GE GFE26JSM Specifications

General

Brand	GE
Model	GFE26JSM
Category	Refrigerator
Language	English