– 84 –
To enter Service Mode, press and hold "Water", "Crushed", and "Cubed" pads simultaneously for 3
seconds.
The display will ash "000" to indicate service mode has been entered.
• Use the Freezer and Fridge pads to choose the desired service test.
• The Freezer button decreases the test number while the Fridge Button increases the test number.
• Press Alarm on the dispenser to execute the test indicated by the displays.
• A test mode must be selected within 30 minutes or the display board will execute a software reset to
exit the service mode selection menu.
• To exit Service Mode, select Test t12 (Refrigerator Reset).
• Service Mode will automatically exit after 15 minutes of inactivity.
Service Mode
To Next Page
Loading...