GE GL 311 F3/4031 P/VE - Aligning the Pole Columns Using a Tire Lever (if Required)

INSTALLATION
44 / 146 OI 250 (EN) REV7 /REV7
6.9.5 Aligning the Pole Columns Using a Tire Lever (if required)
In order to connect the pole columns, a tire lever (16) is used to mo-
ve the pole columns.
• Brace the tire lever against the side of the lattice support and
press it against the flange on the crankcase in order to move the
pole columns.
The SF
6
filling connection can be damaged by contact with the ti-
re lever.
Therefore:
- Never position the tire lever against the SF
6
filling connec-
tion in order to move the pole columns.
CAUTION
16
BA-P-GITTER-MONTIERHEBEL-POL-B