GE GL 311 F3/4031 P/VE - Removing the Guide Shaft

RECONDITIONING
REV7 /REV7 OI 250 (EN) 85 / 146
10.1.3 Removing the Guide Shaft
• Remove the socket head cap screw (17) and the locking plate
(18).
• Remove the guide shaft (28) and space sleeve (21) from the fixed
contact.
• The interrupter unit is connected by the guide lever to the
movable contact system. Remove the interrupter unit, the guide
lever and the movable contact system from the fixed contact.
5 Interrupter unit 1x
6 Movable contact system 1x
7 Fixed contact 1x
8Guide lever 2x
17 Socket head cap screw, M8x12 A-70 1x
18 Locking plate 1x
21 Spacer sleeve 1x
28 Guide shaft 1x
5
7
6
17
8
28
18
21
BA-P-PS-3