GE Hydran M2-X - Changing the Value of a Parameter

Page 39
Hydran* M2-X Installation Guide
MA-028 Rev. 2.1, 11-Jun-20
Press Escape button to
go back to Comm Setup.
Select Comm Channel
Setup
Press Enter
Change, as required:
RS232 Baud Rate
RS485 Baud Rate
Notes:
• Each Hydran M2-X unit in the local network must be set to the same Power
Station ID and RS485 Baud Rate.
• Each Hydran M2-X in the local network must be set to a unique Monitor ID.