Hydran* M2-X Installation Guide
MA-028 Rev. 2.1, 11-Jun-20
2 GENERAL CAUTIONS & WARNINGS
Turn off the electric power at the fuse box or service
panel before making any electrical connections,
and ensure a proper ground connection is made
before connecting line voltage. Failure to do so can
result in property damage, personal injury and/or
death.
Mishandling of the Hydran M2-X sensor (such as a
perforation or scratch on the membrane or
subjecting the sensor to paint or solvent) voids the
warranty.
It is recommended to read all warnings and
considerations given in Chapter 1 and 2 of the
Hydran M2-X Instruction Manual before proceeding
with the installation.
Hazardous location (HazLoc) certification pertains to units with part number M2-
X-HZ only. The Hydran M2-X carrying the “HZ” designation is certified for use in
hazardous locations as identified by the branding on the product casing including the
serial number label as shown in Figure 1 and Figure 2. Once a HazLoc product is in
location, do not:
• open the internal case
• service the battery
• remove the battery
• or perform servicing on any other
parts.
Figure 1: Certified for Hazardous Locations
To Next Page
Loading...
Need help?
General
