Careand cleaning of the range.
BurnerGratesand VentGrille
Porcelain eimmel burner grates and the
xent grille should be washed regularly
and, of com_e, atter spilloxe_.
The grates ma} be washed either in the
dishwasher or you may wash them in hot
soap)' water and rinse with clean water:
_l_)/l Ill,IV also use abrasive cleanei_ and
scotwing pads to clean bm'ner grates and
the vent grille. D_' the grates and grille
with a cloth---<lon't put them back on the
cooktop wet.
To get rid of burned-on toed, place the
grates and grille in a covered containe_:
Add 1/4 cup (59 mi,) ammonia and let
them soak several hom_ or overnight.
_M_sh, rinse well and d_'.
_Mthough they're durable, the grates
and grille will gradually lose their shine,
regardless ot the best care you can give
them. This is due to their continual
exposure to high temperatures.
Do not operate a burner t0r an extended
period of time without cookware on the
grate. The finish on the grate ma} chip
without cookware to absorb the heat.
_dter cleaning, replace the center vent
grille fi_t. Replace the side grates so that
the center extensions are oriented toward
the center of the cooktop. The rear
center extensions should slightly overlap
the vent grille. Make sm'e the grates are
positioned securely over the burne_ and
that they are stable and level.
Rubber Grate Feet
For stability, your cooktop has rubber
teet on the burner grates. If am' of these
rubber teet should become damaged or
lost, replace them immediately.
To order replacement rubber grate teet,
please call ore" toll-ti'ee mmfl)er:
National Parts
Center ............... 800.626.2002(U.S.)
800.661.1616(Canada)
ge.cem (U.S.)
www. GEAppliances.ca (Canada)
Rubber Grate Feet ....... #WBO2T10101
32
Oven tigflt Bulbs
NOY£" The glass cover should be
removed on!y when cold. Wearing latex
: .... gloves may offer a better grip.
= = =
CAUTION:
: ' Before replacing your
," oven/ightbulb, disconnect the electrical
' powertotheovenat#lemainfuseor
= =
circuit breaker panel
, " Bulb
= =
= = =
Glasscover
Be s_tre to let the light cover amid bltH)
coo] corn p]ete]}.
For )olaf sati_ do m_ottouch a hot bldb
with bare hm_ds or a &m_p cloth.
Toremove:
[] Tm'N_ the glass cover
com_terc]ockwise 1/4 mrm_ m_ti] the
tabs of the glass cover dear the
grooves of the socket.
[] [Jsim)g gloves or a (h) clot]] remove
the b_db by [m]]i m,_it straight_ o_a.
To replace:
[] [Jse a _ew 130-volt ]]a]oge]_ b_db,
m_t to exceed 50 watts.
[] [Jsi_)g gloves or a dry doth, remove
the b_db t}'om its )ackq _h__ Do m_t
to_ch the b_db with bare th_gers.
Usegloves
] P_*sh the b_db straight h_to the
receptacle all the way.
[] Place die tabs of die glass cover i_m_
the grooves of the socket. Tm'_ the
glass co_er clockwise 1/4 mr_ to
e_gage.
For improved ]ighti_g i_side
the ove]L c]em_ tile glass co\er
f_'eque_t]y _sh_g a wet cloth. This
sho_ld be do_e whe]_ the o_e]_ is
corn p]ete]y coo].
] Recoimect electrical power to
the (}veil
To Next Page
Loading...
