Cleaningtheglass cooktop.
co=o,,oo o.,
Begin by locking tile cooktop; see tile
LOC_UNLOCK.OLOaSECONOS ControiLockoutsection.
Cleanyourcooktopafter
eachspill. UseCERAMA
BRYTE®CeramicCooktop
Cleaner.*
Normal Daily Use Cleaning
ONLY use CERAI_,L_ BRYTE _ Ceramic
Cooktop Cleaner* on tile glass cooktop.
Other creams may not be as eitectixe.
To maintain and protect the surihce of
your glass cooktop, fl)llow these steps:
[] gefiwe using the cooktop flit the
first time, clean it with CERAMA
BRYTE:' Ceramic Cooktop Cleaner.*
This helps protect the top and
makes cleanup easiei;
[] Daily use of CEIL_LA BRYTE _>
Ceramic Cooktop Cleaner* will
help kee I) tile cooktop looking new.
[] Remove tile burner grates and
vent grille.
[] Shake the cleaning cream _ell.
Appl) a fb_ drops of CERAI_L_
BRYTE" Ceramic Cooktop Cleaner*
directl) to the cooktop.
[] Use a paper towel or CEP_f_L_ BR'tTE ®
cleaning, l)ad ibr Ceramic Cooktops* to
clean tim entire cooktop surfi_ce.
[] Use a dry cloth or paper towel to
remove all cleaning residue. No
need to rinse.
NOTE:/tis veryirgportantthatyouDONOTheat
thecooktopunti/ithasbeenc/eanedthorough/y
Use a CERAMA BRYTE'_Cleaning
Pad for Ceramic Cooktops._
Burned-On Residue
WARNING:DAMAGEto yourg/asssurface
mayoccurif youusescrubpadsother than the
pad includedwith yourcooktop.
] _Mlow tile cooktop to cool,
[] Remoxe tile burner grates and
xent ,Tille
[_] Spread ,a few drops of CEI_kMA
BRYFE:' Ceramic (_ooktop Cleaner*
on the entire bm'ned residue area.
[]
[]
[]
Using a CEIL_4A BRYTE <_>
cleaning pad fi)r Ceramic
Cooktops*, tub the residue area,
applying pressm'e as needed.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been renloved, polish
the entire sm'iime with CERAMA
BRYFE:' Ceramic Cookto ) Cleaner*
and a paper towel.
ii/i
The CERAMABRYTE*_Ceramic
Cooktop Scraper* and all
recommended suppfies are
available through our Parts Cente_
See itTstructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
] _dlow tile cooktop to cool.
[] ]_eln()xe tile burner grates and
xent ,rille
[]
Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surface
and scrape the soil. It will be
necessary to apply pressure to tile
I';IZOI" SCI'_lpeI" iH order to YeIllOVe
tile residue.
[] _Mter scraping with tile razor
scraper, spread a few drops of
[]
CEI_L_<IA BRYTE <_Ceramic
Cooktop Cleaner* on the entire
burned residue area. Use a
CEIL_<IA BRYTE e>cleaning pad flit
Ceramic ())oktops* t() remove any
remaining residue.
For additional protection,
alter all residue has been
removed, polish the entire
sm'iace with CERAMA BRYTE ')
Ceramic Cooktop Cleaner* and a
paper towel.
'_ l'b) Canadia_ models, use a Cam._-atqmn,ed (quiz,ale_l/ whe_l C1J_,I3J; I 111¢Y77 ]re)ducts <m. _o! avaikzble.
To Next Page
Loading...
