GE M60 UR Series

2-12 M60 Motor Protection System GE Multilin
2.2 ORDER CODES 2 PRODUCT DESCRIPTION
2
D0 | | | | | | | | | IEEE 1588 and CyberSentry Lvl 1
D1 | | | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and Ethernet Global Data (EGD)
D3 | | | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and IEC 61850
D4 | | | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and IEC 61850 and Ethernet Global Data (EGD)
DS | | | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and Broken rotor bar detection
DT | | | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and Broken rotor bar detection and Ethernet Global Data (EGD)
DU | | | | | | | | | IEEE 1588 and CyberSentry Lvl 1 and Broken rotor bar detection and IEC 61850
DV | | | | | | | | | IEEE 1588 + CyberSentry Lvl 1 + Broken rotor bar detection + IEC 61850 + Ethernet Global Data(EGD)
E0 | | | | | | | | | IEEE 1588 and PRP
E1 | | | | | | | | | IEEE 1588, PRP, and Ethernet Global Data (EGD)
E3 | | | | | | | | | IEEE 1588, PRP, and IEC 61850
E4 | | | | | | | | | IEEE 1588, PRP, Ethernet Global Data (EGD), and IEC 61850
ES | | | | | | | | | IEEE 1588, PRP, and Rotor broken bar
ET | | | | | | | | | IEEE 1588, PRP, Rotor broken bar, and Ethernet Global Data (EGD)
EU | | | | | | | | | IEEE 1588, PRP, Rotor broken bar, and IEC 61850
EV | | | | | | | | | IEEE 1588, PRP, Rotor broken bar, Ethernet Global Data (EGD), and IEC 61850
F0 | | | | | | | | | PRP and CyberSentry Lvl 1
F1 | | | | | | | | | PRP, CyberSentry Lvl 1, and Ethernet Global Data (EGD)
F3 | | | | | | | | | PRP, CyberSentry Lvl 1, and IEC 61850
F4 | | | | | | | | | PRP, CyberSentry Lvl 1, Ethernet Global Date (EGD), and IEC 61850
FS | | | | | | | | | PRP, CyberSentry Lvl 1, and Rotor broken bar
FT | | | | | | | | | PRP, CyberSentry Lvl 1, Rotor broken bar, and Ethernet Global Data (EGD)
FU | | | | | | | | | PRP, CyberSentry Lvl 1, Rotor broken bar, and IEC 61850
FV | | | | | | | | | PRP, CyberSentry Lvl 1, Rotor broken bar, Ethernet Global Data (EGD), and IEC 61850
G0 | | | | | | | | | IEEE 1588, PRP, and CyberSentry Lvl 1
G1 | | | | | | | | | IEEE 1588, PRP, CyberSentry Lvl 1, Ethernet Global Data (EGD)
G3 | | | | | | | | | IEEE 1588, PRP, CyberSentry Lvl 1, and IEC 61850
G4 | | | | | | | | | IEEE 1588, PRP, CyberSentry Lvl 1, Ethernet Global Data (EGD), and IEC 61850
GS | | | | | | | | | IEEE 1588, PRP, CyberSentry Lvl 1, and Rotor broken bar
GT | | | | | | | | | IEEE 1588, PRP, CyberSentry Lvl 1, Rotor broken bar, and Ethernet Global Data (EGD)
GU | | | | | | | | | IEEE 1588, PRP, CyberSentry Lvl 1, Rotor broken bar, and IEC 61850
GV | | | | | | | | | IEEE 1588, PRP, CyberSentry Lvl 1, Rotor broken bar, Ethernet Global Data (EGD), and IEC 61850
J0 | | | | | | | | | IEC 60870-5-103
J1 | | | | | | | | | IEC 60870-5-103 + EGD
J3 | | | | | | | | | IEC 60870-5-103 + IEC 61850
J4 | | | | | | | | | IEC 60870-5-103 + EGD + IEC 61850
JS | | | | | | | | | IEC 60870-5-103 + Rotor broken bar
JT | | | | | | | | | IEC 60870-5-103 + Rotor broken bar + EGD
JU | | | | | | | | | IEC 60870-5-103 + Rotor broken bar + IEC 61850
JV | | | | | | | | | IEC 60870-5-103 + Rotor broken bar + EGD + IEC 61850
K0 | | | | | | | | | IEEE 1588 + PRP + IEC 60870-5-103
K1 | | | | | | | | | IEEE 1588 + PRP + IEC 60870-5-103 + EGD
K3 | | | | | | | | | IEEE 1588 + PRP + IEC 60870-5-103 + IEC 61850
K4 | | | | | | | | | IEEE 1588 + PRP + IEC 60870-5-103 + EGD + IEC 61850
KS | | | | | | | | | IEEE 1588 + PRP + IEC 60870-5-103 + Rotor broken bar
KT | | | | | | | | | IEEE 1588 + PRP + IEC 60870-5-103 + Rotor broken bar + EGD
KU | | | | | | | | | IEEE 1588 + PRP + IEC 60870-5-103 + Rotor broken bar + IEC 61850
KV | | | | | | | | | IEEE 1588 + PRP + IEC 60870-5-103 + Rotor broken bar + EGD + IEC 61850
L0 | | | | | | | | | IEC 60870-5-103 + IEEE 1588 + PRP + CyberSentry Lvl 1
L1 | | | | | | | | | IEC 60870-5-103 + IEEE 1588 + PRP + CyberSentry Lvl 1 + EGD
L3 | | | | | | | | | IEC 60870-5-103 + IEEE 1588 + PRP + CyberSentry Lvl 1 + IEC 61850
L4 | | | | | | | | | IEC 60870-5-103 + IEEE 1588 + PRP + CyberSentry Lvl 1 + EGD + IEC 61850
LS | | | | | | | | | IEC 60870-5-103 + IEEE 1588 + PRP + CyberSentry Lvl 1 + Rotor broken bar
LT | | | | | | | | | IEC 60870-5-103 + IEEE 1588 + PRP + CyberSentry Lvl 1 + Rotor broken bar + EGD
LU | | | | | | | | | IEC 60870-5-103 + IEEE 1588 + PRP + CyberSentry Lvl 1 + Rotor broken bar + IEC 61850
LV | | | | | | | | | IEC 60870-5-103 + IEEE 1588 + PRP + CyberSentry Lvl 1 + Rotor broken bar + EGD + IEC 61850
MOUNT/COATING H | | | | | | | | Horizontal (19” rack)
A | | | | | | | | Horizontal (19” rack) with harsh environmental coating
FACEPLATE/ DISPLAY C | | | | | | | English display
D | | | | | | | French display
R | | | | | | | Russian display
A | | | | | | | Chinese display
P | | | | | | | English display with 4 small and 12 large programmable pushbuttons
G | | | | | | | French display with 4 small and 12 large programmable pushbuttons
S | | | | | | | Russian display with 4 small and 12 large programmable pushbuttons
B | | | | | | | Chinese display with 4 small and 12 large programmable pushbuttons
K | | | | | | | Enhanced front panel with English display
M | | | | | | | Enhanced front panel with French display
Q | | | | | | | Enhanced front panel with Russian display
U | | | | | | | Enhanced front panel with Chinese display
L | | | | | | | Enhanced front panel with English display and user-programmable pushbuttons
N | | | | | | | Enhanced front panel with French display and user-programmable pushbuttons
T | | | | | | | Enhanced front panel with Russian display and user-programmable pushbuttons
V | | | | | | | Enhanced front panel with Chinese display and user-programmable pushbuttons
W | | | | | | | Enhanced front panel with Turkish display
Y | | | | | | | Enhanced front panel with Turkish display and user-programmable pushbuttons
I | | | | | | | Enhanced front panel with German display
J | | | | | | | Enhanced front panel with German display and user-programmable pushbuttons
Table 2–6: M60 ORDER CODES (HORIZONTAL UNITS WITH PROCESS BUS)