GE M60 UR Series

GE Multilin M60 Motor Protection System 6-25
6 ACTUAL VALUES 6.4 RECORDS
6
6.4RECORDS 6.4.1 USER-PROGRAMMABLE FAULT REPORTS
PATH: ACTUAL VALUES  RECORDS  USER-PROGRAMMABLE FAULT REPORT
This menu displays the user-programmable fault report actual values. See the User-Programmable Fault Report section in
chapter 5 for additional information on this feature.
6.4.2 STARTING RECORDS
PATH: ACTUAL VALUES  RECORDS  STARTING RECORDS  MOTOR START 1(5)
Up to five motor starts are displayed. When the buffer is full, the newest record overwrites the oldest record.
 USER-PROGRAMMABLE
 FAULT REPORT
NEWEST RECORD
NUMBER: 0
MESSAGE
LAST CLEARED DATE:
2002/8/11 14:23:57
MESSAGE
LAST REPORT DATE:
2002/10/09 08:25:27
NO STARTING RECORDS
TO REPORT
or
 MOTOR START 1

START 1 DATE:
2002/08/11
Range: Date in format YYYY/MM/DD
MESSAGE
START 1 TIME:
00:00:00.000000
Range: Time in format HH:MM:SS.ssssss
MESSAGE
START 1 ACCELERATION
TIME: 4.57 s
MESSAGE
START 1 EFFECTIVE
CURRENT: 5.85 x FLA
MESSAGE
START 1 PEAK
CURRENT: 6.70 x FLA