GE M60 UR Series

6-24 M60 Motor Protection System GE Multilin
6.3 METERING 6 ACTUAL VALUES
6
6.3.9 IEC 61580 GOOSE ANALOG VALUES
PATH: ACTUAL VALUES  METERING  IEC 61850 GOOSE ANALOGS
The M60 Motor Protection System is provided with optional IEC 61850 communications capability. This
feature is specified as a software option at the time of ordering. See the Order Codes section of chapter 2
for details.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.
6.3.10 TRANSDUCER INPUTS AND OUTPUTS
a) RTD AND DCMA INPUTS
PATH: ACTUAL VALUES  METERING  TRANSDUCER I/O DCMA INPUTS  DCMA INPUT xx
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES  METERING  TRANSDUCER I/O RTD INPUTS  RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
b) RRTD INPUTS
PATH: ACTUAL VALUES  METERING  TRANSDUCER I/O RRTD INPUTS  RRTD INPUT 1(12)
Actual values for each RRTD input channel that is enabled are displayed this menu. The top line the programmed RRTD ID
and the bottom line displays the metered value.
 IEC 61850
 GOOSE ANALOGS
ANALOG INPUT 1
0.000
MESSAGE
ANALOG INPUT 2
0.000
MESSAGE
ANALOG INPUT 3
0.000

MESSAGE
ANALOG INPUT 32
0.000
 DCMA INPUT xx

DCMA INPUT xx
0.000 mA
 RTD INPUT xx

RTD INPUT xx
-50 °C
 RRTD INPUT 1

RRTD INPUT 1
-50°C