CHAPTER 3: INTERFACES SOFTWARE INTERFACE
869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL 3–37
•Click on Trigger Waveform to trigger a waveform capture.
• To view the captured waveforms, click on the Launch V
iewer button. A detailed
Waveform Capture window appears as shown below.
•Click on the Sav
e button to save the selected waveform to the local PC. A new window
appears, requesting the file name and path. One file is saved as a COMTRADE file, with
the extension "CFG." The other file is a "DAT" file, required by the COMTRADE file for
proper display of waveforms.
• To view a previously saved COMTRADE file, click the Open butt
on and select the
corresponding COMTRADE file.
To Next Page
