4–208 869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
PROTECTION CHAPTER 4: SETPOINTS
BLOCK
Range: FlexLogic Operand
Default: Off
The Phase Reversal can be blocked by any asserted FlexLogic operand.
OUTPUT RELAY X
Range: Do Not Operate, Operate
Default: Do Not Operate
Any assignable output relay can be selected to operate upon Phase Reversal operation.
EVENTS
Range: Enabled, Disabled
Default: Enabled
TARGETS
Range: Self-Reset, Latched, Disabled
Default: Self-Reset
To Next Page
Loading...
