CHAPTER 3: INTERFACES FRONT CONTROL PANEL INTERFACE
869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL 3–5
Figure 3-5: Keypad Pushbuttons
Each Keypad pushbutton serves the following function:
The Home pushbut
ton is used to display the home screen, and all screens defined under
the Front Panel/Screens menu as default screens.
The Ent
er pushbutton has a dual function. It is used to display a sub-menu when an item is
highlighted. It is also used to save the desired value for any selected setpoint.
The Up
, and Down pushbuttons are used to select/highlight an item from a menu, as well
as select a value from the list of values for a chosen item.
The Escape pushb
utton is used to display the previous menu. This pushbutton can also be
used to cancel a setpoint change.
The Re
set pushbutton clears all latched LED indications, target messages, and latched
output relays, providing the conditions causing these events are not present.
To Next Page
Loading...
