QUICK REFERENCE GUIDE
469 MOTOR MANAGEMENT RELAY – QUICK REFERENCE GUIDE 19
5. If the status indicator is red, verify that the serial cable is properly connected to the
relay, and that the relay has been properly configured for communications (steps
described earlier).
The front panel setpoints can now be edited, printed, or changed according to user
specifications. Other setpoint and commands windows can be displayed and edited in a
similar manner. Actual values windows are also available for display. These windows can
be locked, arranged, and resized at will.
Note
Refer to the EnerVista 469 Setup help file for additional information about the using the
software.
To Next Page
Loading...
