GE NetworX NX-6V2 User Manual

NX-6V2 Control 27
126 ZONE TYPE 9 ALARM EVENT CODE 1............. numerical
Location 126 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
127 ZONE TYPE 9 CHARACTERISTIC SELECT 5............. feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25.
128 ZONE TYPE 10 ALARM EVENT CODE 1............. numerical
Location 128 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
129 ZONE TYPE 10 CHARACTERISTIC SELECT 5.............feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25
130 ZONE TYPE 11 ALARM EVENT CODE 1............. numerical
Location 130 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
131 ZONE TYPE 11 CHARACTERISTIC SELECT 5.............feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25
132 ZONE TYPE 12 ALARM EVENT CODE 1............. numerical
Location 132 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
133 ZONE TYPE 12 CHARACTERISTIC SELECT 5.............feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25
134 ZONE TYPE 13 ALARM EVENT CODE 1............. numerical
Location 134 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
135 ZONE TYPE 13 CHARACTERISTIC SELECT 5.............feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25
136 ZONE TYPE 14 ALARM EVENT CODE 1............. numerical
Location 136 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
137 ZONE TYPE 14 CHARACTERISTIC SELECT 5.............feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25
138 ZONE TYPE 15 ALARM EVENT CODE 1............. numerical
Location 138 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
139 ZONE TYPE 15 CHARACTERISTIC SELECT 5.............feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25
140 ZONE TYPE 16 ALARM EVENT CODE 1............. numerical
Location 140 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
141 ZONE TYPE 16 CHARACTERISTIC SELECT 5.............feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25
142 ZONE TYPE 17 ALARM EVENT CODE 1............. numerical
Location 142 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
143 ZONE TYPE 17 CHARACTERISTIC SELECT 5.............feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25
144 ZONE TYPE 18 ALARM EVENT CODE 1............. numerical
Location 144 contains the event code sent for a Contact ID or SIA report. The desired event code should be chosen from the list on
page 43. The zone ID will be that zone that is in alarm. If 4+2 format is being used, refer to Location 110 on page 25 for details.
145 ZONE TYPE 18 CHARACTERISTIC SELECT 5.............feature select
Use "Zone Type Characteristic Selections" described in Location 111, page 25

GE NetworX NX-6V2 Specifications

Power

operating power	16.5 VAC 40, or 50 VA Transformer
auxiliary power with 25 VA Transformer	12 VDC Regulated 500 mA
auxiliary power with 40 or 50 VA Transformer	12 VDC Regulated 1 AMP
auxiliary power with NX-320E Power Supply	12 VDC Regulated 2 AMPS + Control Panel Power

Loop Specifications

loop resistance standard loop	300 Ohms Maximum
loop resistance 2-wire smokes	30 Ohms Maximum
loop response	Selectable 50mS or 500mS

Operating Environment

operating temperature	32 to 120 degrees F

Keypad Specifications

LED keypad current draw	130 mA max.
LED keypad zones normal without sounder	55 mA
LED keypad dimensions	6.4" Wide, 4.0" High, 1.1" Deep
NX148E LCD keypad current draw	110 mA max.
NX148E LCD keypad without sounder	75 mA
NX148E LCD keypad dimensions	6.4" Wide, 5.3" High, 1.0" Deep

Dimensions and Weight

metal enclosure dimension	11.25" Wide, 11.25" High, 3.50" Deep
shipping weight	9 lbs.