NX-10 Expander Installation Guide
29
3. "On" if driver follows Schedule 3.
4. "On" if driver follows Schedule 4.
5. "On" if driver follows Schedule 5.
6. "On" if driver follows Schedule 6.
7. "On" if driver follows Schedule 7.
8. "On" if driver follows Schedule 8.
Segment 3 More Door Options:
1. "On" if egress input is to be disabled.
2. Reserved
3. Reserved
4. Reserved
5. Reserved
6. Reserved
7. Reserved
8. Reserved
LOCATION 247 Programming the Opening Time for Schedule 1 (2 segments of numerical
data)
Segment 1 Program the hour of the opening time in 24-hour format. (Default is 8 = 8:00 AM).
Segment 2 Program the minutes after the hour of the opening time for Schedule 1. (Default is
0).
LOCATION 248 Programming the Closing Time for Schedule 1 (2 segments of numerical
data)
Segment 1 Program the hour of the closing time in 24-hour format. (Default is 20 = 8:00 PM).
Segment 2 Program the minutes after the hour of the closing time for Schedule 1. (Default is
0).
LOCATION 249 Programming the Days for Schedule 1 (1 segment of binary data)
1. "On" if schedule is active on Sunday.
2. "On" if schedule is active on Monday.
3. "On" if schedule is active on Tuesday.
To Next Page
Loading...
Need help?
General
