EasyManua.ls Logo

GE P54E - Page 592

GE P54E
850 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix B - Settings and Signals
P54A/B/C/E
B26
P54xMED-TM-EN-1
MENU TEXT COL ROW DEFAULT SETTING AVAILABLE OPTIONS
DESCRIPTION
This command resets all CB shots counters to zero
Res AROK by UI 07 96 Enabled
Disabled
Enabled
[Indexed String]
If Enabled, this allows the successful auto-reclose signal to be reset by user interface command Reset AROK Ind.
Res AROK by NoAR 07 97 Disabled
Disabled
Enabled
[Indexed String]
If Enabled, allows the successful autoreclose signal to be reset by autoreclosing being disabled
Res AROK by Ext 07 98 Disabled
Disabled
Enabled
[Indexed String]
If Enabled, allows successful autoreclose signal reset by external DDB input Ext Rst CBx AROK via PSL.
Res AROK by TDly 07 99 Disabled
Disabled
Enabled
[Indexed String]
If Enabled, allows successful autoreclose signal to reset after time AROK Reset Time
Res AROK by TDly 07 9A 1
From 1 to 9999 in steps of 1
[Courier Number (time-seconds)]
Reset time for successful autoreclose signal if Res AROK by TDly is set to Enabled
Res LO by CB IS 07 9B Enabled
Disabled
Enabled
[Indexed String]
If Enabled, allows reset of CB lockout state when CB is "In Service" (i.e. CB is closed for time > CB IS Time)
Res LO by UI 07 9C Enabled
Disabled
Enabled
[Indexed String]
If Enabled, allows reset of each CB lockout state by UI command
Res LO by NoAR 07 9D Disabled
Disabled
Enabled
[Indexed String]
If Enabled, allows reset of CB lockout state by selecting autoreclosing disabled
Res LO by ExtDDB 07 9E Disabled
Disabled
Enabled
[Indexed String]
If Enabled, allows reset of CB lockout state by external DDB input Ext Rst CBx AROK via PSL.
Res LO by TDelay 07 9F Disabled
Disabled
Enabled
[Indexed String]
If Enabled, allows reset of CB lockout state after time LO Reset Time
LO Reset Time 07 A0 1
From 1 to 9999 in steps of 1
[Courier Number (time-seconds)]
Reset time for CB lockout if Res LO by TDelay is set to Enabled
DATE AND TIME
08
00
This column contains Date and Time stamp settings
Date/Time
08
01
Displays the IED’s current date and time.
Date
08
N/A
01/01/1994
Displays the date. Front Panel Menu only
Time
08
N/A
0
Displays the time. Front Panel Menu only
Battery Status 08 06
Dead
Healthy
[Indexed String]
Displays whether the battery is healthy or not
Battery Alarm 08 07 Enabled
Disabled
Enabled
[Indexed String]
Enables or disables battery alarm. The battery alarm needs to be disabled when a battery is removed or not used
Primary Source
08
08
PTP
IRIG-B

Table of Contents

Related product manuals