GE PACE6000

6 Reference and Specification
K0443 Revision A 6 - 22 [EN] English
Language
Operation in any of the following languages can be selected:
•English (default)
•French
•German
•Italian
• Portuguese
• Spanish
• Russian
• Chinese
• Japanese More languages can be added.
Adding a Language
Languages can be added as follows (Ref: Figure 1, Language Setting)
1 Create a language file by translating from the English language file.
2 Check the pixel width of each translated word by using the PACE language check file,
(download from GE Support Central PACE).
3 Create an empty DPI folder on a USB stick.
4 Create an empty “LANGUAGES” sub-folder.
5 The language file naming conventions is “Language<<language name>>.lng”.
6 Save the language file into the languages sub-folder.
7 Use the PACE instrument software upgrade procedure to upload the language file
from the USB stick into the PACE instrument.
Note: An English and French language file name would be: LanguageEnglish.lng and
LanguageFrench.lng.
Language files named “Language.lng” or in any other format will be ignored by PACE.