5–24 PQMII POWER QUALITY METER – INSTRUCTION MANUAL
CHAPTER 5: SETPOINTS
Phase B kVA 0 to 65400 1 kVA
Phase C PF 0.01 lead to 0.01 lag 0.01
Phase C kW –32500 to +32500 1 kW
Phase C kvar –32500 to +32500 1 kvar
Phase C kVA 0 to 65400 1 kVA
3 Phase +kWh Used 0 to 65400 1 kWh
3 Phase +kvarh Used 0 to 65400 1 kvarh
3 Phase –kWh Used 0 to 65400 1 kWh
3 Phase –kvarh Used 0 to 65400 1 kvarh
3 Phase kVAh Used 0 to 65400 1 kVAh
Phase A Current Demand 0 to 7500 1 A
Phase B Current Demand 0 to 7500 1 A
Phase C Current Demand 0 to 7500 1 A
Neutral Current Demand 0 to 7500 1 A
3 Phase kW Demand –32500 to +32500 1 kW
3 Phase kvar Demand –32500 to +32500 1 kvar
3 Phase kVA Demand 0 to 65400 1 kVA
3 Phase Current THD 0.0 to 100% 0.1%
3 Phase Voltage THD 0.0 to 100% 0.1%
Phase A Current THD 0.0 to 100% 0.1%
Phase B Current THD 0.0 to 100% 0.1%
Phase C Current THD 0.0 to 100% 0.1%
Voltage Van THD 0.0 to 100% 0.1%
Voltage Vbn THD 0.0 to 100% 0.1%
Voltage Vcn THD 0.0 to 100% 0.1%
Voltage Vab THD 0.0 to 100% 0.1%
Voltage Vbc THD 0.0 to 100% 0.1%
Neutral Current THD 0.0 to 100% 0.1%
Serial Control –32500 to +32500 1 Unit
Table 5–4: Analog Output Parameters (Sheet 2 of 2)
Parameter Range Step
To Next Page
Loading...
