GE VG4043 - Auto Play; Auto TV;VCR

TheVCR will only respond to the compatible remote's VCR2,
VCR2.LD, or DVD.VCR2 button. If you change the remote setting
to VCR2, the remote that came with your VCR will no longer
control the VCR.
Use the compatible remote to change the remote setting back to
VCR1. Display the PREFERENCES menu, press 1, and then press
VCR1.Then the remote that came with the VCR will be able to
control it again.
Auto Play
This feature allows theVCR to automatically start playing when
you insert a tape with the safety tab removed. Press 2 to switch
between ON or OFE
Select ON if you want a tape with its safety tab removed to
start playing automatically when the tape is inserted.
Select OFF if you do notwant a tape with its safety tab
removed to start playing automatically.
Auto TV/VCR
This feature controls whether theTV/VCR switch changes
automatically to the VCR mode when the VCR is turned on. Press
3 to switch between ON and OFE
Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted. This
only applies if you connect the IN FROM ANT. and OUTTO TV
jacks of your VCR andTV and watch yourVCR on channel 3 or
4 ofyourTV.
Select OFF if you want the VCR to remain in theTV mode.
This is useful if you watch your VCR on theTV's video input
and you don't want your antenna/cable signal interrupted by
the VCR.
15