Remote Buttons
The remote control is capable of controlling more than just
yourVCR, and if you have compatible GE, RCA, or ProScan
components, you may be able to control them without even
having to program the remote.
Component Buttons
POWER Turns offVCR when remote is set to control the VCR.
Also turns some compatible components on and off.
SAT CABLE Turns on a compatible GE, RCA, or ProScan digital
satellite receiver and sets the remote to control the receiver. Can
be programmed to control different brands of digital satellite
receivers. Used with the POWER button to turn on a compatible
cable box (if programmed) and sets the remote to control the
cable box.
TV Turns on a compatible GE, RCA, or ProScanTV and sets the
remote to control theTV. Also used with the POWER button to
turn on a different brand of TV (if programmed) and sets the
remote to control theTV.
VCR Turns on a compatible GE, RCA, or ProScan VCR and sets
the remote to control the VCR.
VCR Function Buttons
CHAR Up or Down Selects next higher or lower channel in
the VCR's channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
F.ADV Lets you view one frame with each press of the button
when tape is in pause.
FIND Fast forwards the tape when the VCR is stopped. Searches
forward through a tape during playback. Starts slow motion
during play-pause and increases slow-motion speed.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels. In menu mode, press
to go back to previous menu.
INFO Shows the status displays on theTV screen.
POWER
O SAT
VCR CABLE TV
©©©
PAUSE PLAY RECORD
0@©
o@o
F.ADV STOP SEARCH
CHAR
'o o °o O-
0'0 °0 0 ÷
MUTE VOL
°0 © O_
INPUT TV,VCR INFO MENU CLEAR
©oooo
GO BACK SPEED
© ©
SLOW TRACKING
-O O* -O O-
18
To Next Page
Loading...
