INFO Shows theTV's status displays on theTV screen.
MUTE Reduces volume to minimum level.
Numbers (O through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 -- appears on the screen.Then press the other
two numbers.
POWER Turns theTV on and off.
SLOW + and - Used with someTV menus to select and adjust
features.
VOL Up and Down Raises and lowers sound of TV.
Playing a Tape
.
.
Tune theTV to yourVCR viewing channel
(3, 4, orTV's video input).
Insert a tape in the VCR.
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is
removed).
• Press FWD or REV to position the tape.
• Press PLAY (if necessary) to begin tape play.
• Press PAUSE for stop action.
• PressTRACKING up or down to remove any streaks from the
picture, if necessary.
• Press STOP to stop playback.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
AutomaticTracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned on whenever a tape is
inserted or theVCR's power is
turned on.
2O
To Next Page
Loading...
