GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
3 - 30 Section 3-6 - Configuration
3-6-3-3 Select Video Format, PAL or NTSC
This selection must correspond to the Video Standard (PAL or NTSC) used at the location.
•From the Video Settings drop-down menu, select the correct video format (NTSC or PAL).
3-6-3-4 Alphanumeric Keyboard configuration
NOTE: This Procedure is not required if the alphanumeric keyboard is a US keyboard, since the default
setting is set to US English keyboards.
1.) Select Keyboard Setup to get access to Keyboard Properties.
2.) Select Languages, to display the program languages screen.
3.) Use the Language used in menus and dialogs scroll bar to find the correct language for your use.
Figure 3-14 Select Video Format
Figure 3-15 Select Keyboard Setup
Figure 3-16 Select Keyboard Properties
To Next Page
Loading...
