GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 3 - System setup 3 - 41
3-8-5 DHCP setup
Follow the instructions below to configure the VIVID E9 / VIVID E7’s use of DHCP.
.
1.) When in the TCP/IP screen, select Network Settings to display the Network Connections screen,
see Figure 3-26 "Network Connections" on page 3-41.
2.) Right-click Local Area Connection and select Properties from the pop-up menu to go to the Local
Area Connection Properties screen (see next page).
Figure 3-25 Advanced Settings
Figure 3-26 Network Connections
To Next Page
Loading...
